Φ8.0 Series External Fixation Fixator – Distal tibia semicircular frame

(This frame is for reference only, the actual surgery depends on the fracture).

Frame detail:

Use one connecting rod (U-shaped) in the distal fracture area as a guide, put three 5 mm bone screws, connect the connecting rod (U-shaped) and the bone screw by three pin to rod couplings II. Put two 5mm bone screws in the parallel shaft layout of humeral shaft, and mount the needle block X. Insert two 30-degree pillars into the needle block X in a "V" shape. Connect all the components into a frame with four rod to rod couplings VII and two Ф8 L250mm connecting rods (straight) and finally lock them. (In the operation, the needle block X should be used as a guide for the parallel layout of bone screw)

Features:  

1. Easy to operate, flexible combination, can build a three- dimensional stable external fixation system.
2. According to the adaptation symptoms, the stent can be freely assembled during the operation, and the components can be added to the frame at any time.
3. PEEK fix clamp help reduce the overall frame weight.
4. PEEK fix clamp has low developing degree, easy operation.
5. Carbon fiber connecting rod build elastic frame, to reduce stress concentration.

Recommended configurations:

Product Image	Order Code.	Product Name	Specification (mm)	Qty
	20.10.0408201.300	Connecting rod(U shape)	Ф8 M	1
	20.10.0108250.300	Connecting rod (straight)	Ф8, 250mm	2
	20.20.0208201.400	Pin to rod coupling II	2holes Ф8/Ф5	3
	20.20.0708201.400	Rod to rod coupling VII	2 holes Ф8	4
	20.20.1008501.400	Coupling X	5 holes Ф5	1
	20.30.0308101.400	30° Post	Ф8	2
	19.32.513.0501501	Bone screw	Ф5.0×150mm	5