Indication:
Neck of humerus medical locking plate indicated for fractures and fracture dislocations, osteotomies and nonunions of the proximal humerus, particularly for patients with osteopenic bone.
Used for Φ4.0 locking screw, Φ3.5 cortex screw and Φ4.0 cancellous screw, matched with 4.0 series surgical instrument set.
Multi-axial neck of humerus locking plate orthopedic implant is address complex fractures of the proximal humerus.
Features:
1. Multi-axial ring design for proximal part can be adjustment the angel to meet the clinic demand;
2. Titanium and advanced processing technology;
3. Low profile design helps reduce soft tissue irritation;
4. Surface anodized;
5. Anatomical shape design;
6. Combi-hole can be choosing both locking screw and cortex screw;
Indication:
Multi-axial neck of humerus locking plate indicated for fractures and fracture dislocations, osteotomies and nonunions of the proximal humerus, particularly for patients with osteopenic bone.
Used for Φ4.0 locking screw, Φ3.5 cortex screw and Φ4.0 cancellous screw, matched with 4.0 series orthopedic instrument set
Multi-axial Neck of Humerus Locking Plate Specification
|
Order code |
Specification |
|
|
10.14.13.03001000 |
3 Holes |
89mm |
|
10.14.13.04001000 |
4 Holes |
102mm |
|
10.14.13.05001000 |
5 Holes |
115mm |
|
10.14.13.06001000 |
6 Holes |
128mm |
|
10.14.13.07001000 |
7 Holes |
141mm |
|
10.14.13.08001000 |
8 Holes |
154mm |
|
10.14.13.10001000 |
10 Holes |
180mm |
|
10.14.13.12001000 |
12 Holes |
206mm |
Neck of Humerus Locking Plate
Neck of humerus locking plate is address complex fractures of the proximal humerus.
Features:
1. Titanium material and advanced processing technology;
2. Low profile design helps reduce soft tissue irritation;
3. Surface anodized;
4. Anatomical shape design;
5. Combi-hole can be choosing both locking screw and cortex screw;
Indication:
|
Order code |
Specification |
|
|
10.14.12.03001300 |
3 Holes |
89mm |
|
10.14.12.04001300 |
4 Holes |
102mm |
|
*10.14.12.05001300 |
5 Holes |
115mm |
|
10.14.12.06001300 |
6 Holes |
128mm |
|
10.14.12.07001300 |
7 Holes |
141mm |
|
10.14.12.08001300 |
8 Holes |
154mm |
|
10.14.12.10001300 |
10 Holes |
180mm |
|
10.14.12.12001300 |
12 Holes |
206mm |
The titanium bone plate manufactured by our company is designed according to the PRINCIPLE of AO internal fixation, ISO5836 standard and relevant national or industrial standards. The screw pass of titanium bone plate is designed with common pass and threaded pass respectively. Straight and anatomic titanium plates were designed for the head according to the anatomical structure of the bone.
Titanium locking bone plate available in titanium, Orthopedics Locking Plates, known as Locking Compression Plates also, is a combination of the locking screw technology and the conventional plating techniques. The Orthopedic Locking Plates are produced in various sizes. Plates as well as screws are included in them. The locking screw system makes the plate fixation very resistant to failure, for the screw does not pullout, nor does it get loose.
Locking bone plates are manufactured by unalloyed titanium which complies with ISO5832-2 or GB/T 13810-2007. Therefore, their biocompatibility is better.MRI and CT can be performed after operation. Special supporting tools are provided, making the product easy to use, safe and reliable. The combination holes consisting of threaded holes and compression holes on the locking plate can be used for locking and compression, which is convenient for the doctor to choose. The limited contact between bone plate and bone reduces the destruction of periosteal blood supply.
Titanium bone plates as orthopedic implants are provided for medical institutions, and are intended to treat the fracture sites of patients under general anesthesia by trained or experienced doctors in the operation room complying with environmental requirements.
The internal fixation implants shall be checked carefully before use, and not used immediately in the case of deformation and scratches. Analyze the fracture type according to the X-ray film of the fracture site, formulate the surgical method, and select the appropriate type and specification of titanium bone plate. Titanium bone plates are usually removed within 2 years after fracture healing.
For inquiries about our products or pricelist,please leave to us and we will be in touch within 24 hours.
We are manufacturer who has more than 20 years experience on research & design, production and sale.
We have passed CE, ISO13485, ISO9001 certification. From production to delivery, each piece of products will be strictly inspected more than 5 times. If you need, we accept you to let a third-party inspection company to conduct product quality.
We have our own design department which accept customized services, welcome you contact us to develop new products.
Yes sure, small order are also welcomed.
We will issue Proforma Invoice for you after noting the exact product and quantity you need, to pay via T/T, PayPal, Western Union, etc. We also support Alibaba online trade assurance order.
Sample order will be sent within 3 days after receiving sample fee. 3-15 days for general order according to the quantity. Customized order need mutual negotiation.
Sure, We warmly welcome you visit us. Our factory is located in Zhangjiagang City, Jiangsu Province.
Pease allowup to 24hrs.Our agent wilcontact youas soon as possible.
